Por Amor Liquid Feeder – Medium 10ml

The moat style features a wide round design with a bottom group of tunnels for liquid distribution, these feeders do very well with both thick and runny liquids.

Having an elevated platform makes it harder for ants to cover and/or place  debris on the moat, such debris can cause liquid or moisture run-off into the outworld.

• Standard thread makes it easy to use and  fits other readily available glass jars
• One feeder lid fits all 3 glass jar sizes
• It features a small built-in dish (moat) to keep small spills contained
• Has 16 feeding tunnels that release liquid horizontally for large colonies
• Option to have an elevated platform (feet) for those crowded or small spaces
• Made with PLA pro plastic, rinse under tap water with gentle soap

TIP for liquid feeders: if you are having a hard time not spilling liquids after filling and turning around (requires a quick steady flip); simply put a slim circle of cotton on the inside of the feeder enough to cover up the feeding tunnels, when you screw the jar in, its edge should press just slightly against the cotton, this will make it easy to turn over without spills and also will prevent ants from entering the glass jar when empty, ants will enter the tunnel encounter a cotton wall soaked with liquid instead of unrestricted access inside, we recommend using this method at all times as it is safer and renews a clean cotton each fill up.

• Specifications and Care

  Assembled Height:

  Small; 35 mm / Medium; 55 mm / Large; 71 mm

  Legs add 5 mm to the final height.

  The base measures 45 mm in diameter, does not fit inside the mini glass formicarium (at such stage you only need small plates and you can connect a test tube with water and cotton on the side).

   

  Weight:

  Small; 11 grams / Medium; 15 grams / Large; 17 grams

   

  Material: Glass and PLA Pro plastic

   

  Wash with soapy cold/warm water. Rinse thoroughly.

  Not dishwasher safe.

  Do not over tighten the glass bottle onto the feeding lid, this is not necessary.

  Alternatively if you have a small species that drowns easily or your ants know how to flood the surrounding dish, you can insert a small loose piece of cotton right at the edge of the bottle entrance and screw the feeding base in place, this will restrict the flow of liquids and also makes it easier to flip without spilling.